messages.en.json

{
    "ERROR_AT_LEAST_ONE_OF_THOSE_MUST_BE_DEFINED": "At least one of the following values should be specified : %variables%",
    "ERROR_CLOISON_AVAL_UN_OUVRAGE_REGULE": "Only one regulated device is allowed on the downstream wall",
    "WARNING_DEVER_ZR_SUP_Z1": "Elevation of the river bed can't be higher than water elevation: Impossible to calculate the kinetic energy",
    "WARNING_DOWNSTREAM_ELEVATION_POSSIBLE_SUBMERSION": "Downstream elevation is higher than weir elevation (%submergencePerc%% submergence)",
    "WARNING_ORIFICE_FREE_DOWNSTREAM_ELEVATION_POSSIBLE_SUBMERSION": "Downstream elevation is higher than orifice center elevation (%submergencePerc%% submergence)",
    "WARNING_NOTCH_SUBMERGENCE_GREATER_THAN_09": "Notch submergence (%submergencePerc%%) is higher than recommended boundary (90%)",
    "WARNING_SLOT_SUBMERGENCE_NOT_BETWEEN_07_AND_09": "Slot submergence (%submergencePerc%%) is not in the recommended boundaries (70 to 90%)",
    "ERROR_STRUCTURE_SUBMERGENCE_LOWER_THAN": "Slot submergence (%submergencePerc%%) is lower than %min%%",
    "WARNING_WEIR_SUBMERGENCE_LOWER_THAN_08": "Weir submergence factor (%submergencePerc%%) is lower than the recommended boundary (80%)",
    "WARNING_INFO_COUNT_SHORT": "%d info(s)",
    "WARNING_WARNING_COUNT_SHORT": "%d warning(s)",
    "WARNING_ERROR_COUNT_SHORT": "%d error(s)",
    "WARNING_WARNINGS_ABSTRACT": "%nb% warnings occurred during calculation",
    "WARNING_ERRORS_ABSTRACT": "%nb% error occurred during calculation",
    "WARNING_ERRORS_ABSTRACT_PLUR": "%nb% errors occurred during calculation",
    "ERROR_BIEF_Z1_CALC_FAILED": "Unable to calculate upstream elevation (calculation interrupted before upstream)",
    "ERROR_BIEF_Z2_CALC_FAILED": "Unable to calculate downstream elevation (calculation interrupted before downstream)",
    "ERROR_DICHO_CONVERGE": "Dichotomy could not converge. Last approximation: %lastApproximation%",
    "ERROR_DICHO_FUNCTION_VARIATION": "unable to determinate function direction of variation",
    "ERROR_DICHO_INIT_DOMAIN": "Dichotomy: target %targetSymbol%=%targetValue% does not exist for variable %variableSymbol% valued in interval %variableInterval%",
    "ERROR_DICHO_INVALID_STEP_GROWTH": "Dichotomy (initial interval search): invalid null step growth",
    "ERROR_DICHO_NULL_STEP": "Dichotomy (initial interval search): invalid null step",
    "ERROR_DICHO_TARGET_TOO_HIGH": "Dichotomy: the solution %targetSymbol%=%targetValue% is greater than the maximum computable value %targetSymbol%(%variableSymbol%=%variableExtremeValue%)=%extremeTarget%)",
    "ERROR_DICHO_TARGET_TOO_LOW": "Dichotomy: the solution %targetSymbol%=%targetValue%  is lower than the minimum computable value %targetSymbol%(%variableSymbol%=%variableExtremeValue%)=%extremeTarget%)",
    "ERROR_DIVISION_BY_ZERO": "Division by zero",
    "ERROR_ELEVATION_ZI_LOWER_THAN_Z2": "Upstream elevation is lower than downstream elevation",
    "ERROR_IN_CALC_CHAIN": "An error occurred in calculation chain",
    "WARNING_ERROR_IN_CALC_CHAIN_STEPS": "Errors occurred during chain calculation",
    "ERROR_INTERVAL_OUTSIDE": "Interval: value %value% is outside of %interval%",
    "ERROR_INTERVAL_UNDEF": "Interval: invalid 'undefined' value",
    "ERROR_INVALID_AT_POSITION": "Position %s:",
    "ERROR_LOADING_SESSION": "Unable to load session",
    "ERROR_MINMAXSTEP_MAX": "Value is not in ]%s,%s]",
    "ERROR_MINMAXSTEP_MIN": "Value is not in [%s,%s[",
    "ERROR_MINMAXSTEP_STEP": "Value is not in %s",
    "ERROR_NEWTON_DERIVEE_NULLE": "Null function derivative in Newton computation",
    "ERROR_NON_INTEGER_POWER_ON_NEGATIVE_NUMBER": "Exponent of a negative number must be an integer value",
    "ERROR_PAB_CALC_Z1_CLOISON": "Wall #%n%: error in calculating the upstream water elevation",
    "ERROR_PAB_CALC_Z1_CLOISON_DW": "Downwall: error in calculating the upstream water elevation",
    "ERROR_PAB_Z1_LOWER_THAN_Z2": "Upstream water elevation should be higher than downstream water elevation",
    "ERROR_PAB_Z1_LOWER_THAN_UPSTREAM_WALL": "Upstream water elevation is too low for water to flow through the first wall",
    "ERROR_PAR_NB_INCONSISTENT": "Number of baffles should be %stdNb%",
    "ERROR_PAR_ZR_ZD_MISMATCH": "Values of %var_ZR% and %var_ZD% mismatch : either %var_ZR% should be %expectedZR%, or %var_ZD% should be %expectedZD%",
    "ERROR_PARAM_MUST_BE_A_NUMBER": "Please type a numeric value",
    "ERROR_PARAM_MUST_BE_AT_LEAST": "Value must be >= %s",
    "ERROR_PARAM_MUST_BE_POSITIVE": "Please type a positive numeric value",
    "ERROR_PARAM_NULL": "Parameter value must not be NULL",
    "ERROR_PARAMDEF_CALC_UNDEFINED": "calculability of '%symbol%' parameter is undefined",
    "ERROR_PARAMDEF_LINKED_VALUE_UNDEFINED": "value of '%symbol%' linked parameter is undefined",
    "ERROR_PARAMDEF_VALUE_FIXED": "value of '%symbol%' parameter cannot be changed",
    "ERROR_PARAMDEF_VALUE_INTEGER": "value of '%symbol%' parameter must be integer",
    "ERROR_PARAMDEF_VALUE_INTERVAL": "parameter '%symbol%': value %value% is out of [%minValue%, %maxValue%] interval",
    "ERROR_PARAMDEF_VALUE_NULL": "value of '%symbol%' parameter cannot be 0",
    "ERROR_PARAMDEF_VALUE_POS": "value %value% of '%symbol%' parameter is invalid (cannot be <=0)",
    "ERROR_PARAMDEF_VALUE_POSNULL": "value %value% of '%symbol%' parameter is invalid (cannot be <0)",
    "ERROR_PARAMDEF_VALUE_UNDEFINED": "value of '%symbol%' parameter is undefined",
    "ERROR_PARAMDOMAIN_INTERVAL_BOUNDS": "invalid %minValue%/%maxValue% min/max boundaries for 'interval' parameter definition domain",
    "ERROR_PARAMDOMAIN_INVALID": "parameter '%symbol%: non supported '%domain%' definition domain",
    "WARNING_PREBARRAGE_NON_CONVERGENCE": "Pre-dam: calculation converged with a water elevation precision of %precision%&nbsp;m",
    "ERROR_PREBARRAGE_Z2_SUP_Z1": "Downstream water elevation is greater than upstream water elevation",
    "ERROR_PROBLEM_LOADING_SESSION": "Session loaded, with errors",
    "ERROR_REMOUS_NO_WATER_LINE": "No water line can be calculated",
    "ERROR_STRUCTURE_AU_MOINS_UNE": "A structure needs at least one device",
    "WARNING_REMOUS_PAS_CALCUL_DEPUIS_AMONT": "Upstream boundary condition < Critical elevation: no possible calculation from upstream",
    "WARNING_REMOUS_PAS_CALCUL_DEPUIS_AVAL": "Downstream boundary condition < Critical elevation: no possible calculation from downstream",
    "ERROR_REMOUS_PAS_CALCUL": "No possible calculation, neither from upstream nor from downstream",
    "ERROR_REMOUS_PENTE_FORTE": "The water line slope is too steep at abscissa %x% m (the discretisation step should be reduced)",
    "ERROR_REMOUS_PAS_SUPERIEUR_BIEF": "Discretisation step should be less than or equal to the reach length",
    "ERROR_RU_CIRC_LEVEL_TOO_HIGH": "Uniform flow cannot be calculated with a pipe under load",
    "ERROR_NEWTON_NON_CONVERGENCE": "Non-convergence (Newton's method)",
    "ERROR_SECTION_NON_CONVERGENCE_NEWTON_HCONJUG": "Non-convergence of the calculation of the combined depth (Newton's method)",
    "ERROR_SECTION_NON_CONVERGENCE_NEWTON_HCRITIQUE": "Non-convergence of the calculation of the critical depth (Newton's method)",
    "ERROR_SECTION_NON_CONVERGENCE_NEWTON_HCOR": "Non convergence of the calculation of the corresponding elevation (Newton's method)",
    "ERROR_SECTION_NON_CONVERGENCE_NEWTON_HNORMALE": "Non convergence of the calculation of the normal depth (Newton's method)",
    "ERROR_SECTION_PENTE_NEG_NULLE_HNORMALE_INF": "The slope is negative or zero, the normal depth is infinite",
    "ERROR_SECTION_PERIMETRE_NUL": "Section: calculation is impossible when perimeter is null",
    "ERROR_SECTION_RAYON_NUL": "Section: calculation is impossible when radius is null",
    "ERROR_SECTION_SURFACE_NULLE": "Section: calculation is impossible when surface is null",
    "ERROR_SOMETHING_FAILED_IN_CHILD": "Calculation of child module #%number% failed",
    "ERROR_SOLVEUR_NO_VARIATED_PARAMS_ALLOWED": "Solver cannot be used with a modules chain containing variated parameters",
    "ERROR_STRUCTURE_Q_TROP_ELEVE": "The flow passing through the other devices is too high: the requested parameter is not calculable.",
    "ERROR_STRUCTURE_ZDV_PAS_CALCULABLE": "Parameter \"Crest elevation\" cannot be calculated with this discharge law",
    "ERROR_STRUCTURE_Z_EGAUX_Q_NON_NUL": "Upstream and downstream elevations are equal but flow is not null",
    "WARNING_COEF_DEBIT_NULL": "Apron n°%number%: Value of calculated parameter is null when discharge coefficient is null",
    "ERROR_D65_NULL": "Calculation is impossible when d65 is null",
    "INFO_CALCULATOR_CALC_NAME": "Calculator name",
    "INFO_CALCULATOR_CALCULER": "Compute",
    "INFO_CALCULATOR_CLONE": "Duplicate",
    "INFO_CALCULATOR_CLOSE": "Close",
    "INFO_CALCULATOR_LOAD_PREDEFINED_ESPECE": "Load predefined species",
    "INFO_CALCULATOR_OPEN_HELP": "Help",
    "INFO_CALCULATOR_PARAMFIXES": "Fixed parameters",
    "INFO_CALCULATOR_RESULTS_EXPORT_ALL_PB_RESULTS": "Export all results",
    "INFO_CALCULATOR_RESULTS_GENERATE_PAB": "Generate a fish ladder",
    "INFO_CALCULATOR_RESULTS_GENERATE_RU_SP": "Hydraulic details of section",
    "INFO_CALCULATOR_RESULTS_GENERATE_PAR_SIMULATION": "Generate a simulation",
    "INFO_CALCULATOR_RESULTS_GENERATE_SP_AMONT": "Hydraulic details of upstream section",
    "INFO_CALCULATOR_RESULTS_GENERATE_SP_AVAL": "Hydraulic details of downstream section",
    "INFO_CALCULATOR_RESULTS_TITLE": "Results",
    "INFO_CALCULATOR_RESULTS_TITLE_PB_BASINS": "Basins results",
    "INFO_CALCULATOR_RESULTS_TITLE_PB_WALL": "Résults for %s",
    "INFO_CALCULATOR_SAVE": "Save",
    "INFO_CALCULATOR_USED_BY": "Used by",
    "INFO_CALCULATOR_VALEURS": "Values",
    "INFO_BIEF_DESCRIPTION": "open channel canal flow backwater curve",
    "INFO_BIEF_TITRE_COURT": "Reach",
    "INFO_BIEF_TITRE": "Up/downstream elevations of a reach",
    "INFO_CLOISONS_DESCRIPTION": "step slot weir",
    "INFO_CLOISONS_TITRE_COURT": "Cross walls",
    "INFO_CLOISONS_TITRE": "Fish ladder: Cross walls",
    "INFO_CLOSE_DIALOGUE_DEPENDING_MODULES": "The following modules depend on the one you are closing:",
    "INFO_CLOSE_DIALOGUE_TEXT": "Warning ! Parameters and results of this module will be lost.",
    "INFO_CLOSE_DIALOGUE_TITRE": "Closing calculation module",
    "INFO_CONCENTRATIONBLOCS_TITRE": "Blocks concentration",
    "INFO_CONCENTRATIONBLOCS_DESCRIPTION": "rock ramp fish pass",
    "INFO_CONCENTRATIONBLOCS_TITRE_COURT": "Blocks conc.",
    "INFO_CONDUITEDISTRIBUTRICE_DESCRIPTION": "flow Blasius",
    "INFO_CONDUITEDISTRIBUTRICE_TITRE_COURT": "Distrib.",
    "INFO_CONDUITEDISTRIBUTRICE_TITRE": "Distributor pipe",
    "INFO_COURBEREMOUS_DESCRIPTION": "open channel regime flow subcritical supercritical hydraulic jump",
    "INFO_COURBEREMOUS_TITRE_COURT": "Backwater",
    "INFO_COURBEREMOUS_TITRE": "Backwater curves",
    "INFO_DEVER_DESCRIPTION": "slot threshold approach velocity head hydraulic",
    "INFO_DEVER_TITRE_COURT": "Free weir",
    "INFO_DEVER_TITRE": "Free flow weir stage-discharge laws",
    "INFO_DIAGRAM_SOLVEUR_FINDS": "finds",
    "INFO_DIAGRAM_SOLVEUR_READS": "reads",
    "INFO_DIAGRAM_VERIFICATEUR_VERIFIES_PASS": "verifies pass",
    "INFO_DIAGRAM_VERIFICATEUR_VERIFIES_SPECIES": "verifies species",
    "INFO_DIAGRAM_TITLE": "Calculation modules diagram",
    "INFO_DIAGRAM_DRAWING_ERROR": "Error while drawing diagram",
    "INFO_DIAGRAM_CALCULATED_PARAM": "calculated parameter",
    "INFO_DIAGRAM_SHOW_NOTES": "Show notes",
    "INFO_DIALOG_COMPUTED_VALUE_TITLE": "Edit initial value",
    "INFO_DIALOG_EDIT_PAB_INTERPOLATION_BOUNDS": "between %s and %s",
    "INFO_DIALOG_EDIT_PAB_N_DEVICES": "%s device(s)",
    "INFO_DIALOG_EDIT_PAB_N_WALLS": "%s wall(s): %s device(s)",
    "INFO_DIALOG_EDIT_PAB_N_WALLS_P_DEVICES": "%s wall(s) + %s device(s): %s devices",
    "INFO_DIALOG_EDIT_PAB_OPTION_VARIABLE": "Variable to edit",
    "INFO_DIALOG_EDIT_PAB_OPTION_SET_VALUE": "Fixed value",
    "INFO_DIALOG_EDIT_PAB_OPTION_DELTA": "Delta",
    "INFO_DIALOG_EDIT_PAB_OPTION_INTERPOLATE": "Interpolate",
    "INFO_DIALOG_EDIT_PAB_TITLE": "Edit values",
    "INFO_DIALOG_EMPTY_CURRENT_SESSION": "Empty current session",
    "INFO_DIALOG_ERROR_LOADING_FILE": "File syntax seems incorrect",
    "INFO_DIALOG_FILE_IS_EMPTY": "File contains no module",
    "INFO_DIALOG_FIX_MISSING_DEPENDENCIES": "Fix missing dependencies",
    "INFO_DIALOG_FORMAT_VERSIONS_MISMATCH": "File format versions mismatch (file: %s, jalhyd: %s)",
    "INFO_DIALOG_LOAD_SESSION_FILENAME": "Choose a file",
    "INFO_DIALOG_LOAD_SESSION_TITLE": "Load calculator modules",
    "INFO_DIALOG_PAB_NB": "Number of falls",
    "INFO_DIALOG_PAB_Q": "Flow (m³/s)",
    "INFO_DIALOG_PAB_Z1": "Upstream elevation (m)",
    "INFO_DIALOG_PAB_Z2": "Downstream elevation (m)",
    "INFO_DIALOG_SAVE_SESSION_FILENAME": "File name",
    "INFO_DIALOG_SAVE_SESSION_TITLE": "Save calculator modules",
    "INFO_EMPTY_SESSION_DIALOGUE_TEXT": "Warning ! All open calculators will be lost. Continue ?",
    "INFO_EMPTY_SESSION_DIALOGUE_TITRE": "New session",
    "INFO_ENUM_MACRORUGOFLOWTYPE_0": "Emergent",
    "INFO_ENUM_MACRORUGOFLOWTYPE_1": "Quasi-emergent",
    "INFO_ENUM_MACRORUGOFLOWTYPE_2": "Submerged",
    "INFO_ENUM_OUVRAGE_Q_MODE_0": "Weir",
    "INFO_ENUM_OUVRAGE_Q_MODE_1": "Orifice",
    "INFO_ENUM_OUVRAGE_Q_MODE_2": "Zero flow",
    "INFO_ENUM_OUVRAGE_Q_REGIME_0": "Free flow",
    "INFO_ENUM_OUVRAGE_Q_REGIME_1": "Partially submerged",
    "INFO_ENUM_OUVRAGE_Q_REGIME_2": "Submerged",
    "INFO_ENUM_OUVRAGE_Q_REGIME_3": "Zero flow",
    "INFO_ENUM_PARFLOWREGIME_0": "Free",
    "INFO_ENUM_PARFLOWREGIME_1": "Submerged",
    "INFO_ENUM_SPECIES_1": "Salmon, trout [50-100] (1)",
    "INFO_ENUM_SPECIES_2": "Mule (2)",
    "INFO_ENUM_SPECIES_3a": "Great shad (3a)",
    "INFO_ENUM_SPECIES_3b": "Shad (3b)",
    "INFO_ENUM_SPECIES_3c": "Sea lamprey (3c)",
    "INFO_ENUM_SPECIES_4a": "Trout [25-55] (4a)",
    "INFO_ENUM_SPECIES_4b": "River trout [15-30] (4b)",
    "INFO_ENUM_SPECIES_5": "Aspe, pike (5)",
    "INFO_ENUM_SPECIES_6": "Common grayling (6)",
    "INFO_ENUM_SPECIES_7a": "Barbel, chub, nase (7a)",
    "INFO_ENUM_SPECIES_7b": "River lamprey (7b)",
    "INFO_ENUM_SPECIES_8a": "Common carp (8a)",
    "INFO_ENUM_SPECIES_8b": "Common bream, pike-perch (8b)",
    "INFO_ENUM_SPECIES_8c": "White bream, ide, burbot, perch, tench (8c)",
    "INFO_ENUM_SPECIES_8d": "Common dace (8d)",
    "INFO_ENUM_SPECIES_9a": "Bleak, spirlin, barbel, souffia, crucian carp, roach... (9a)",
    "INFO_ENUM_SPECIES_9b": "Apron, sculpins, ruffe, loach... (9b)",
    "INFO_ENUM_SPECIES_10": "Sunbleak, bitterling, stickleback, minnow (10)",
    "INFO_ENUM_SPECIES_11a": "European eel [yellow] (11a)",
    "INFO_ENUM_SPECIES_11b": "European Eel [glass eel] (11b)",
    "INFO_ENUM_STRUCTUREFLOWMODE_0": "Weir",
    "INFO_ENUM_STRUCTUREFLOWMODE_1": "Orifice",
    "INFO_ENUM_STRUCTUREFLOWMODE_2": "Zero flow",
    "INFO_ENUM_STRUCTUREFLOWREGIME_0": "Free flow",
    "INFO_ENUM_STRUCTUREFLOWREGIME_1": "Partially submerged",
    "INFO_ENUM_STRUCTUREFLOWREGIME_2": "Submerged",
    "INFO_ENUM_STRUCTUREFLOWREGIME_3": "Zero flow",
    "INFO_ENUM_STRUCTUREJETTYPE_0": "diving",
    "INFO_ENUM_STRUCTUREJETTYPE_1": "surface",
    "INFO_ENUM_STRUCTUREJETTYPE_2": "not applicable",
    "INFO_CHART_BUTTON_TITLE_RESET_ZOOM": "Restore default zoom",
    "INFO_CHART_BUTTON_TITLE_EXPORT_IMAGE": "Save picture",
    "INFO_CHART_BUTTON_TITLE_ENTER_FS": "Display fullscreen",
    "INFO_CHART_BUTTON_TITLE_EXIT_FS": "Exit fullscreen mode",
    "INFO_DEVICE_ADDED": "1 device added",
    "INFO_DEVICE_ADDED_N_TIMES": "%s devices added",
    "INFO_DEVICE_COPIED": "Device #%s copied",
    "INFO_DEVICE_COPIED_N_TIMES": "Device #%s copied %s times",
    "INFO_DEVICE_MOVED": "Device #%s moved",
    "INFO_DEVICE_REMOVED": "Device #%s removed",
    "INFO_DEVICES_REMOVED": "%s device(s) removed",
    "INFO_STUFF_ADDED": "1 %s added",
    "INFO_STUFF_ADDED_N_TIMES": "%s %s added",
    "INFO_STUFF_COPIED": "%s #%s copied",
    "INFO_STUFF_COPIED_N_TIMES": "%s #%s copied %s times",
    "INFO_STUFF_MOVED": "%s #%s moved",
    "INFO_STUFF_REMOVED": "%s #%s removed",
    "INFO_STUFF_N": "%s #",
    "INFO_CHILD_TYPE_BASSIN": "basin",
    "INFO_CHILD_TYPE_BASSIN_PLUR": "basins",
    "INFO_CHILD_TYPE_BASSIN_SHORT": "B",
    "INFO_CHILD_TYPE_CLOISON": "wall",
    "INFO_CHILD_TYPE_CLOISON_PLUR": "walls",
    "INFO_CHILD_TYPE_CLOISON_SHORT": "W",
    "INFO_CHILD_TYPE_OUVRAGE": "device",
    "INFO_CHILD_TYPE_OUVRAGE_PLUR": "devices",
    "INFO_CHILD_TYPE_OUVRAGE_SHORT": "D",
    "INFO_CHILD_TYPE_MACRORUGO": "apron",
    "INFO_CHILD_TYPE_RUGOFOND": "apron",
    "INFO_CHILD_TYPE_MACRORUGO_PLUR": "aprons",
    "INFO_CHILD_TYPE_MACRORUGO_SHORT": "A",
    "INFO_CHILD_TYPE_PUISSANCE": "power",
    "INFO_CHILD_TYPE_PUISSANCE_PLUR": "powers",
    "INFO_CHILD_TYPE_PUISSANCE_SHORT": "P",
    "INFO_CHILD_TYPE_SECTION": "section",
    "INFO_CHILD_TYPE_SECTION_PLUR": "sections",
    "INFO_CHILD_TYPE_SECTION_SHORT": "S",
    "INFO_CHILD_TYPE_LECHAPTCALMON": "Lechapt-Calmon",
    "INFO_CHILD_TYPE_STRICKLER": "Strickler",
    "INFO_DIALOG_PARSIM_DESC": "Choose a combination of values to generate the simulation",
    "INFO_FIELDSET_ADD": "Add",
    "INFO_FIELDSET_COPY": "Copy",
    "INFO_FIELDSET_REMOVE": "Remove",
    "INFO_FIELDSET_MOVE_UP": "Move up",
    "INFO_FIELDSET_MOVE_DOWN": "Move down",
    "INFO_FIELDSET_MOVE_LEFT": "Move left",
    "INFO_FIELDSET_MOVE_RIGHT": "Move right",
    "INFO_GRILLE_DESCRIPTION": "downstream migration trashrack conventional oriented inclined",
    "INFO_GRILLE_TITRE_COURT": "Grid",
    "INFO_GRILLE_TITRE": "Loss of charge, water grid",
    "INFO_JET_DESCRIPTION": "downstream migration ichthyocompatible water intakes for small hydroelectric power plants ballistics",
    "INFO_JET_TITRE_COURT": "Jet",
    "INFO_JET_TITRE": "Jet trajectory and impact",
    "INFO_WALL_ADDED": "1 wall added",
    "INFO_WALL_ADDED_N_TIMES": "%s walls added",
    "INFO_WALL_COPIED": "Wall #%s copied",
    "INFO_WALL_COPIED_N_TIMES": "Wall #%s copied %s times",
    "INFO_WALL_MOVED": "Wall #%s moved",
    "INFO_WALL_REMOVED": "Wall #%s removed",
    "INFO_WALLS_AND_DEVICES_REMOVED": "%s wall(s) and %s device(s) removed",
    "INFO_WALLS_REMOVED": "%s wall(s) removed",
    "INFO_JET_TITRE_TRAJECTOIRE": "Trajectory",
    "INFO_JET_TITRE_TRAJECTOIRE_ET_COTE_EAU": "Trajectory and water elevation",
    "INFO_JET_FOND": "Bottom",
    "INFO_LECHAPTCALMON_DESCRIPTION": "pipe flow circular headloss",
    "INFO_LECHAPTCALMON_TITRE_COURT": "Lechapt-C.",
    "INFO_LECHAPTCALMON_TITRE": "Lechapt-Calmon",
    "INFO_PRESSURELOSS_TITRE_DESCRIPTION": "Headloss in a pipe flow",
    "INFO_PRESSURELOSS_TITRE_COURT": "Press. loss",
    "INFO_PRESSURELOSS_TITRE": "Pressure loss",
    "INFO_LIB_ABSCISSE": "Abscissa (m)",
    "INFO_LIB_ALTITUDE": "Altitude (m)",
    "INFO_LIB_LENGTHS": "Every length",
    "INFO_LIB_WIDTHS": "Every width",
    "INFO_LIB_SLOPES": "Every slope",
    "INFO_LIB_HEIGHTS": "Every height",
    "INFO_LIB_BASINFALLS": "Every basin fall",
    "INFO_LIB_TOTALFALLS": "Every total fall",
    "INFO_LIB_ELEVATIONS": "Every elevation",
    "INFO_LIB_VOLUMES": "Every volume",
    "INFO_LIB_FLOWS": "Every flow",
    "INFO_LIB_SPEEDS": "Every velocity",
    "INFO_LIB_DIAMETERS": "Every diameter",
    "INFO_LIB_ABSCISSE_CLOISON": "Wall abscissa",
    "INFO_LIB_ALPHA": "Alpha coefficient",
    "INFO_LIB_ALPHA2": "Half-angle at the apex",
    "INFO_LIB_AMONT": "Upstream",
    "INFO_LIB_AVAL": "Downstream",
    "INFO_LIB_B": "Surface width",
    "INFO_LIB_BASSIN": "Basin",
    "INFO_LIB_BB": "Pool width",
    "INFO_LIB_BETA": "Beta coefficient",
    "INFO_LIB_BT": "Half opening of the triangle",
    "INFO_LIB_CDGR": "Discharge coefficient gate",
    "INFO_LIB_CDGRS": "Discharge coefficient gate submerged",
    "INFO_LIB_CDCUNGE": "Discharge coefficient",
    "INFO_LIB_CDWR": "Discharge coefficient weir",
    "INFO_LIB_CDWSL": "Discharge coefficient slot",
    "INFO_LIB_CDWS": "Discharge coefficient",
    "INFO_LIB_CDT": "Discharge coefficient triangular weir",
    "INFO_LIB_CDO": "Discharge coefficient orifice",
    "INFO_LIB_CLOISON": "Cross wall #",
    "INFO_LIB_CLOISON_N_COURT": "W",
    "INFO_LIB_COTE": "Elevation (m)",
    "INFO_LIB_COTE_VANNE_LEVANTE": "Lift gate elevation",
    "INFO_LIB_CV": "Cv: Velocity coefficient",
    "INFO_LIB_CVQT": "CV.QT: Corrected discharge",
    "INFO_LIB_DH": "Fall",
    "INFO_LIB_DHR": "DHR: Residual fall",
    "INFO_LIB_DISTANCE_AMONT": "Distance from upstream (m)",
    "INFO_LIB_EC": "EC: Kinetic energy",
    "INFO_LIB_ENUM_MACRORUGOFLOWTYPE": "Flow type",
    "INFO_LIB_ENUM_PARFLOWREGIME": "Regime",
    "INFO_LIB_FLU": "Subcritical water line",
    "INFO_LIB_FR": "Froude number",
    "INFO_LIB_FS_OUVRAGE": "Device",
    "INFO_LIB_FS_PARAM_CALC": "Calculation parameters",
    "INFO_LIB_FS_PARAM_HYDRO": "Hydraulic parameters",
    "INFO_LIB_H1": "Upstream head",
    "INFO_LIB_H2": "Downstream head",
    "INFO_LIB_HS": "Specific head",
    "INFO_LIB_HSC": "Critical head",
    "INFO_LIB_I-J": "Linear variation of specific head",
    "INFO_LIB_IMP": "Impulse",
    "INFO_LIB_J": "Head loss",
    "INFO_LIB_L": "Weir width",
    "INFO_LIB_LB": "Pool length",
    "INFO_LIB_LOIDEBIT_KIVI": "Sharp-crested weir (Kindsvater-Carter + Villemonte)",
    "INFO_LIB_LOIDEBIT_WEIRSUBMERGEDLARINIER": "Submerged slot (Larinier)",
    "INFO_LIB_LOIDEBIT_ORIFICESUBMERGED": "Submerged orifice (Bernoulli)",
    "INFO_LIB_LOIDEBIT_ORIFICEFREE": "Free flow orifice (Bernoulli)",
    "INFO_LIB_LOIDEBIT_TRIANGULARWEIRBROAD": "Broad-crested weir (Bos)",
    "INFO_LIB_LOIDEBIT_TRIANGULARWEIRFREE": "Sharp-crested weir (Villemonte)",
    "INFO_LIB_LOIDEBIT_TRIANGULARTRUNCWEIRFREE": "Sharp-crested weir (Villemonte)",
    "INFO_LIB_LOIDEBIT_GATECEM88D": "Broad-crested weir / Orifice (Cemagref)",
    "INFO_LIB_LOIDEBIT_GATECEM88V": "Broad-crested weir / sluice gate (Cemagref)",
    "INFO_LIB_LOIDEBIT_WEIRCEM88D": "Broad-crested weir (Cemagref-D)",
    "INFO_LIB_LOIDEBIT_WEIRCEM88V": "Broad-crested weir (Cemagref-V)",
    "INFO_LIB_LOIDEBIT_CUNGE80": "Broad-crested weir / orifice (Cunge)",
    "INFO_LIB_LOIDEBIT_WEIRCUNGE80": "Broad-crested weir (Cunge)",
    "INFO_LIB_LOIDEBIT_GATECUNGE80": "Broad-crested weir / orifice (Cunge)",
    "INFO_LIB_LOIDEBIT_RECTANGULARORIFICEFREE": "Free flow sluice gate",
    "INFO_LIB_LOIDEBIT_RECTANGULARORIFICESUBMERGED": "Submerged sluice gate",
    "INFO_LIB_LOIDEBIT_WEIRFREE": "Free flow sharp-crested weir (Poleni)",
    "INFO_LIB_LOIDEBIT_WEIRSUBMERGED": "Deeply submerged sharp-crested weir (Rajaratnam)",
    "INFO_LIB_LOIDEBIT_WEIRVILLEMONTE": "Sharp-crested weir (Villemonte)",
    "INFO_LIB_Y": "Water line",
    "INFO_LIB_MINZDV": "Minimal crest elevation",
    "INFO_LIB_MAXZDV": "Maximal crest elevation",
    "INFO_LIB_ENUM_STRUCTUREFLOWMODE": "Mode",
    "INFO_LIB_ENUM_STRUCTUREFLOWREGIME": "Regime",
    "INFO_LIB_ENUM_STRUCTUREJETTYPE": "Jet type",
    "INFO_LIB_OUVRAGE_Q": "Discharge",
    "INFO_LIB_OUVRAGE_ZDV": "Sill elevation",
    "INFO_LIB_P": "Wetted perimeter",
    "INFO_LIB_PB": "Basin mean depth",
    "INFO_LIB_PR": "Display accuracy",
    "INFO_LIB_PV": "Volumic dissipated power",
    "INFO_LIB_Q_GUIDETECH": "Technical guide flow",
    "INFO_LIB_Q": "Discharge",
    "INFO_LIB_QA": "Attraction flow",
    "INFO_LIB_R": "Hydraulic radius",
    "INFO_LIB_RADIER": "Basin bottom",
    "INFO_LIB_RADIER_N": "Apron #",
    "INFO_LIB_RADIER_N_COURT": "A",
    "INFO_LIB_S": "Orifice area",
    "INFO_LIB_SELECT_LOIDEBIT": "Stage-discharge law",
    "INFO_LIB_SELECT_STRUCTURE": "Device",
    "INFO_LIB_STRUCT_CONTAINER": "Devices",
    "INFO_LIB_STRUCTURE_ORIFICE": "Orifice",
    "INFO_LIB_STRUCTURE_SEUILRECTANGULAIRE": "Rectangular weir",
    "INFO_LIB_STRUCTURE_SEUILORIFICERECTANGULAIRE": "Rectangular weir/orifice",
    "INFO_LIB_STRUCTURE_SEUILTRIANGULAIRE": "Triangular weir",
    "INFO_LIB_STRUCTURE_SEUILTRIANGULAIRETRUNC": "Truncated triangular weir",
    "INFO_LIB_STRUCTURE_VANNEFONDRECTANGULAIRE": "Rectangular bottom gate",
    "INFO_LIB_STRUCTURE_N_COURT": "D",
    "INFO_LIB_TAU0": "Tractive force",
    "INFO_LIB_TOR": "Supercritical water line",
    "INFO_LIB_TOTAL": "Total",
    "INFO_LIB_V_GUIDETECH": "Technical guide velocity",
    "INFO_LIB_V": "Average velocity",
    "INFO_LIB_KS": "Equivalent strickler",
    "INFO_LIB_VDEB": "Conveyance velocity",
    "INFO_LIB_VMAX": "Maximal velocity",
    "INFO_LIB_VG": "Averaged velocity between blocks",
    "INFO_LIB_W": "Gate opening",
    "INFO_LIB_X": "Value for searched parameter",
    "INFO_LIB_YC": "Critical depth",
    "INFO_LIB_YCON": "Conjugate depth",
    "INFO_LIB_YCOR": "Corresponding depth",
    "INFO_LIB_YMOY": "Average depth",
    "INFO_LIB_YN": "Normal depth",
    "INFO_LIB_Z": "Water level",
    "INFO_LIB_Z1": "Upstream water level",
    "INFO_LIB_Z2": "Downstream water level",
    "INFO_LIB_ZCO": "Orifice center elevation",
    "INFO_LIB_ZDV": "Crest weir elevation or gate base",
    "INFO_LIB_ZF2": "Downstream bottom elevation",
    "INFO_LIB_ZD1": "Upstream spilling elevation",
    "INFO_LIB_ZD2": "Downstream spilling elevation",
    "INFO_LIB_ZR1": "Upstream apron elevation",
    "INFO_LIB_ZR2": "Downstream apron elevation",
    "INFO_LIB_ZRAM": "Upstream apron elevation",
    "INFO_LIB_ZRMB": "Downstream basin bottom elevation",
    "INFO_LIB_ZT": "Triangle top elevation",
    "INFO_LIB_DHMAXS": "Maximal fall",
    "INFO_LIB_DHMAXP": "Maximal fall",
    "INFO_LIB_BMIN": "Minimal slot or weir width",
    "INFO_LIB_PMINS": "Minimal basin width",
    "INFO_LIB_PMINP": "Minimal basin width",
    "INFO_LIB_LINCL": "Lateral inclination",
    "INFO_LIB_LMINS": "Minimal basin length",
    "INFO_LIB_LMINP": "Minimal basin length",
    "INFO_LIB_HMIN": "Minimal head on weir",
    "INFO_LIB_YMIN": "Minimal water level",
    "INFO_LIB_VEMAX": "Maximal flow velocity",
    "INFO_LIB_YMINSB": "Minimal water level on superactive and chevron baffles",
    "INFO_LIB_YMINPB": "Minimal water level on plane and Fatou baffles",
    "INFO_LIB_PVMAX": "Maximal dissipated power",
    "INFO_LIB_PVMAXPREC": "Recommanded maximal dissipated power",
    "INFO_LIB_PVMAXLIM": "Limit maximal dissipated power",
    "INFO_LIB_PAB_CHART_SEUILS": "Weirs (%s)",
    "INFO_LIB_SUBMERGENCE": "Submergence",
    "INFO_LINKED_VALUE_CHILD": "%s (%s, %s %s)",
    "INFO_LINKED_VALUE_EXTRA_RESULT_OF": "%s (%s)",
    "INFO_LINKED_VALUE_EXTRA_RESULT": "%s (%s)",
    "INFO_LINKED_VALUE_RESULT": "%s (%s)",
    "INFO_LINKED_VALUE_SECTION_RESULT": "%s (%s, section)",
    "INFO_LINKED_VALUE_SECTION": "%s (%s, section)",
    "INFO_LOG_HIDE_DETAILS": "hide details",
    "INFO_LOG_SHOW_DETAILS": "show details",
    "INFO_MACRORUGO_DESCRIPTION": "natural block",
    "INFO_MACRORUGO_TITRE_COURT": "Rock-ramp",
    "INFO_MACRORUGO_TITRE": "Rock-ramp fishpasses",
    "INFO_MACRORUGO_GENERATE_BACKWATER_CURVE":"Generate backwater curve",
    "INFO_MENU_DIAGRAM_TITLE": "Modules diagram",
    "INFO_MACRORUGOCOMPOUND_TITRE": "Compound rock-ramp fishpasses",
    "INFO_MACRORUGOCOMPOUND_DESCRIPTION": "natural multiple inclined block aprons",
    "INFO_MACRORUGOCOMPOUND_TITRE_COURT": "Compound RR",
    "INFO_MACRORUGOCOMPOUND_LINCL": "Lateral inclination (m/m): ",
    "INFO_ONLY_Q_MAY_VARY": "Only flow may vary",
    "INFO_ONLY_Z1_Q_MAY_VARY": "Only upstream elevation and flow may vary",
    "INFO_Z1_Z2_MUST_BE_DEFINED": "Upstream and downstream elevations must be defined",
    "INFO_PENTE_TITRE": "Slope",
    "INFO_PENTE_DESCRIPTION": "open-channel flow drop",
    "INFO_PENTE_TITRE_COURT": "Slope",
    "INFO_MENU_EMPTY_SESSION_TITLE": "New session",
    "INFO_MENU_HELP_TITLE": "Help",
    "INFO_MENU_LOAD_SESSION_TITLE": "Load session",
    "INFO_MENU_NOUVELLE_CALC": "New calculation module",
    "INFO_MENU_RECHERCHE_MODULES": "Search modules",
    "INFO_MENU_REPORT_BUG": "Report an issue",
    "INFO_MENU_RESTORE_DEFAULT_SETTINGS": "Default settings",
    "INFO_MENU_SAVE_SESSION_TITLE": "Save session",
    "INFO_MENU_SAVE_SETTINGS": "Save settings",
    "INFO_MENU_SELECT_CALC": "Select calculator module",
    "INFO_MENU_SESSION_PROPS": "Session properties",
    "INFO_OPTION_ALL_F": "All",
    "INFO_OPTION_ALL": "All",
    "INFO_OPTION_CANCEL": "Cancel",
    "INFO_OPTION_CLOSE": "Close",
    "INFO_OPTION_GENERATE": "Generate",
    "INFO_OPTION_LOAD": "Load",
    "INFO_OPTION_NO": "No",
    "INFO_OPTION_NONE_F": "None",
    "INFO_OPTION_NONE": "None",
    "INFO_OPTION_SAVE": "Save",
    "INFO_OPTION_START_NEW": "Start new session",
    "INFO_OPTION_VALIDATE": "Validate",
    "INFO_OPTION_YES": "Yes",
    "INFO_OUVRAGE": "Structure",
    "INFO_OUVRAGE_N": "Device #",
    "INFO_PAB_BASSIN": "Basin",
    "INFO_PAB_BASSINS": "Basins",
    "INFO_PAB_OUVRAGES": "Devices",
    "INFO_PAB_EDIT_VALUES": "Modify values",
    "INFO_CALCULATE_FIRST": "Calculate this module first",
    "INFO_PAB_NUM_BASSIN": "Basin/wall #",
    "INFO_PAB_HEADER_TYPE": "Type",
    "INFO_PAB_HEADER_PARAMETERS": "Parameters",
    "INFO_PAB_HEADER_VALUES": "Values",
    "INFO_PAB_CLOISON_OUVRAGE_N": "Wall : device #%s",
    "INFO_PAB_LOIDEBIT_WEIRSUBMERGEDLARINIER": "Submerged slot (Larinier)",
    "INFO_PAB_LOIDEBIT_ORIFICESUBMERGED": "Submerged orifice (Bernoulli)",
    "INFO_PAB_LOIDEBIT_TRIANGULARWEIRBROAD": "V-notch broad-crested weir (Bos)",
    "INFO_PAB_LOIDEBIT_TRIANGULARWEIRFREE": "V-notch sharp-crested weir (Villemonte)",
    "INFO_PAB_LOIDEBIT_TRIANGULARTRUNCWEIRFREE": "Truncated triangular weir (Villemonte)",
    "INFO_PAB_LOIDEBIT_GATECEM88D": "Broad-crested weir / Orifice (Cemagref)",
    "INFO_PAB_LOIDEBIT_VANLEVLARINIER": "Regulated submerged slot (Larinier)",
    "INFO_PAB_LOIDEBIT_VANLEVVILLEMONTE": "Regulated notch (Villemonte)",
    "INFO_PAB_LOIDEBIT_WEIRCEM88D": "Broad-crested weir (Cemagref-D)",
    "INFO_PAB_LOIDEBIT_WEIRVILLEMONTE": "Notch (Villemonte)",
    "INFO_PARAMETRES_FIXES": "All parameters must be fixed",
    "INFO_PAB_DESCRIPTION": "basins",
    "INFO_PAB_TITRE_COURT": "Fish ladder",
    "INFO_PAB_TITRE": "Fish ladder",
    "INFO_PAB_TITRE_PROFIL": "Fish ladder longitudinal profile",
    "INFO_PAB_TABLE": "Fish ladder geometry",
    "INFO_PABCHUTE_DESCRIPTION": "basins",
    "INFO_PABCHUTE_TITRE_COURT": "FL: fall",
    "INFO_PABCHUTE_TITRE": "Fish ladder: fall",
    "INFO_PABDIMENSIONS_DESCRIPTION": "basins",
    "INFO_PABDIMENSIONS_TITRE_COURT": "FL: dimensions",
    "INFO_PABDIMENSIONS_TITRE": "Fish ladder: dimensions",
    "INFO_PABNOMBRE_DESCRIPTION": "basins",
    "INFO_PABNOMBRE_TITRE_COURT": "FL: number",
    "INFO_PABNOMBRE_TITRE": "Fish ladder: number of falls",
    "INFO_PABPUISSANCE_DESCRIPTION": "basins",
    "INFO_PABPUISSANCE_TITRE_COURT": "FL: diss. power",
    "INFO_PABPUISSANCE_TITRE": "Fish ladder: dissipated power",
    "INFO_MACRORUGOREMOUS_TITRE_COURT": "Rock R. Backw. curve",
    "INFO_MACRORUGOREMOUS_TITRE": "Rock-ramp backwater curve",
    "INFO_MACRORUGOREMOUS_DESCRIPTION": "Backwater curve in rock-ramp fishpass",
    "INFO_MACRORUGOREMOUS_CREATE_PAM_FIRST": "Create first a rock-ramp fishpass",
    "INFO_PARALLELSTRUCTURE_DESCRIPTION": "orifice gate weir threshold free flow submerged discharge stage-discharge",
    "INFO_PARALLELSTRUCTURE_TITRE_COURT": "// structures",
    "INFO_PARALLELSTRUCTURE_TITRE": "Parallel structures",
    "INFO_PAR_TITRE": "Baffle fishway: setup",
    "INFO_RUGOFOND_TITRE": "Bed roughness fishpasses",
    "INFO_RUGOFOND_TITRE_COURT": "Bed roughness",
    "INFO_RUGOFONDMULTIPLE_TITRE": "Bed roughness fishpasses",
    "INFO_RUGOFONDMULTIPLE_TITRE_COURT": "Bed roughness",
    "INFO_PAR_DESCRIPTION": "planes Denil Fatou superactive mixte chevrons canoe",
    "INFO_PAR_TITRE_COURT": "HF: setup",
    "INFO_PARSIMULATION_TITRE": "Baffle fishway: simulation",
    "INFO_PARSIMULATION_DESCRIPTION": "planes Denil Fatou superactive mixte chevrons canoe",
    "INFO_PARSIMULATION_TITRE_COURT": "HF: simulation",
    "INFO_PARAMFIELD_AWAITING_CALCULATION": "Awaiting calculation",
    "INFO_PARAMFIELD_BOUNDARY_CONDITIONS": "Boundary conditions",
    "INFO_PARAMFIELD_CALCULATED": "Calculated",
    "INFO_PARAMFIELD_CALCULATION_FAILED": "Calculation failed",
    "INFO_PARAMFIELD_CANNOT_CALC_LINKS_LOOP": "This parameter cannot be calculated (links loop)",
    "INFO_PARAMFIELD_CHART_SELECT_X_AXIS": "Variable for X axis",
    "INFO_PARAMFIELD_CHART_SELECT_Y_AXIS": "Variable for Y axis",
    "INFO_PARAMFIELD_CHART_TYPE_HISTOGRAM": "Histogram",
    "INFO_PARAMFIELD_CHART_TYPE_DOTS": "Plot",
    "INFO_PARAMFIELD_CHART_TYPE": "Chart type",
    "INFO_PARAMFIELD_IN_CALCULATION_INITIAL_VALUE": "initial value",
    "INFO_PARAMFIELD_IN_CALCULATION": "In calculation",
    "INFO_PARAMFIELD_PARAMCALCULER": "Calculate",
    "INFO_PARAMFIELD_PARAMFIXE": "Fixed",
    "INFO_PARAMFIELD_PARAMLIE_LABEL": "Linked parameter",
    "INFO_PARAMFIELD_PARAMLIE": "Link",
    "INFO_PARAMFIELD_PARAMVARIER_EDIT_VALUES": "Edit values",
    "INFO_PARAMFIELD_PARAMVARIER_EXT_STRATEGY": "Values list extension strategy",
    "INFO_PARAMFIELD_PARAMVARIER_EXT_STRATEGY_REPEAT_LAST": "Repeat last value",
    "INFO_PARAMFIELD_PARAMVARIER_EXT_STRATEGY_RECYCLE": "Recycle values",
    "INFO_PARAMFIELD_PARAMVARIER_IMPORT_FICHIER": "Import file",
    "INFO_PARAMFIELD_PARAMVARIER_MINMAXSTEP": "min: %s, max: %s, step: %s",
    "INFO_PARAMFIELD_PARAMVARIER_MODE": "Mode",
    "INFO_PARAMFIELD_PARAMVARIER_SEPARATEUR_DECIMAL": "Decimal separator",
    "INFO_PARAMFIELD_PARAMVARIER_SEPARATEUR_POINT": ". (dot)",
    "INFO_PARAMFIELD_PARAMVARIER_SEPARATEUR_VIRGULE": ", (comma)",
    "INFO_PARAMFIELD_PARAMVARIER_SHOW_CHART": "Show values chart",
    "INFO_PARAMFIELD_PARAMVARIER_TITLE": "Multiple values",
    "INFO_PARAMFIELD_PARAMVARIER_VALUES_FORMAT_ERROR": "Incorrect format; accepted separator: %s",
    "INFO_PARAMFIELD_PARAMVARIER_VALUES_FORMAT": "Values list",
    "INFO_PARAMFIELD_PARAMVARIER_VALUES": "Values:",
    "INFO_PARAMFIELD_PARAMVARIER": "Vary",
    "INFO_PARAMFIELD_PASVARIATION": "With a variation step of",
    "INFO_PARAMFIELD_VALEURMAXI": "To maximum value",
    "INFO_PARAMFIELD_VALEURMINI": "From minimum value",
    "INFO_PARAMFIELD_VARIATED": "Variated",
    "INFO_PARAMMODE_LIST": "Values list",
    "INFO_PARAMMODE_MINMAX": "Min/max",
    "INFO_PB_BASSIN_DESCRIPTION": "B%order%",
    "INFO_PB_CLOISON_DESCRIPTION": "%ub%-%db%",
    "INFO_PB_ADD_BASIN": "Add new basin",
    "INFO_PB_ADD_WALL": "Add new wall",
    "INFO_PB_BASSIN_N": "Basin #",
    "INFO_PB_CLOISON": "Wall",
    "INFO_PB_MOVE_BASIN_UP": "Move basin up",
    "INFO_PB_MOVE_BASIN_DOWN": "Move basin down",
    "INFO_PB_NEW_WALL_SELECT_BASINS": "Select basins to connect",
    "INFO_PB_NEW_WALL_UP_BASIN": "upstream basin",
    "INFO_PB_NEW_WALL_DOWN_BASIN": "Downstream basin",
    "INFO_PB_SCHEMA": "Basins layout",
    "INFO_PREBARRAGE_TITRE": "Pre-dams",
    "INFO_PREBARRAGE_DESCRIPTION": "fishes basins cross-walls barrages",
    "INFO_PREBARRAGE_TITRE_COURT": "Pre-dams",
    "INFO_QUICKNAV_CHARTS": "charts",
    "INFO_QUICKNAV_INPUT": "input",
    "INFO_QUICKNAV_RESULTS": "results",
    "WARNING_PREBARRAGE_BASSIN_ZF_SUP_Z1": "Bottom elevation of basin #%n% is greater than upstream water elevation",
    "INFO_REGIMEUNIFORME_DESCRIPTION": "open-channel flow normal depth",
    "INFO_REGIMEUNIFORME_TITRE_COURT": "Uniform flow",
    "INFO_REGIMEUNIFORME_TITRE": "Uniform flow calculation",
    "INFO_REMOUS_CALCUL_FLUVIAL": "Downstream boundary condition >= Critical elevation: calculation of subcritical part from downstream",
    "INFO_REMOUS_CALCUL_TORRENTIEL": "Uptream boundary condition <= Critical elevation: calculation of supercritical part from upstream",
    "INFO_REMOUS_H_CRITIQUE": "Critical water level = %Yc% m",
    "INFO_REMOUS_H_NORMALE": "Normal water level = %Yn% m",
    "INFO_REMOUS_LARGEUR_BERGE": "Width at embankment level = %B% m",
    "INFO_REMOUS_RESSAUT_DEHORS": "Hydraulic jump detected %sens% abscissa %x% m",
    "INFO_REMOUS_RESSAUT_HYDRO": "Hydraulic jump detected between abscissa %xmin% and %xmax% m",
    "INFO_REMOUSRESULTS_ABSCISSE": "Abscissa",
    "INFO_REMOUSRESULTS_BERGE": "Embankment",
    "INFO_REMOUSRESULTS_FOND": "Bottom",
    "INFO_REMOUSRESULTS_TIRANT": "Water depth",
    "INFO_REMOUSRESULTS_TIRANTCRITIQUE": "Critical water level",
    "INFO_REMOUSRESULTS_TIRANTNORMAL": "Normal water level",
    "INFO_REMOUSRESULTS_PARAM_SECTION_PLACEHOLDER": "Generate a parametric section for...",
    "INFO_REPORT_BUG_BODY": "This is an issue report.\n\nPlease describe quickly the issue you encountered, and the steps you followed:\n\n\n\n\n--- Current session state - do not modify text below ---\n------------------------------------------------------------------------\n\n",
    "INFO_REPORT_BUG_SUBJECT": "Issue report",
    "INFO_REQUIRES": "requires",
    "INFO_RESULTS_EXPORT_AS_SPREADSHEET": "Export as XLSX",
    "INFO_SEARCH_NO_RESULT": "No result",
    "INFO_SECTIONPARAMETREE_DESCRIPTION": "open-channel canal rectangular circular trapezoidal depth head normal critical conjugate corresponding subcritical supercritical Froude",
    "INFO_SECTIONPARAMETREE_TITRE_COURT": "Param. section",
    "INFO_SECTIONPARAMETREE_TITRE": "Parametric section",
    "INFO_SECTIONPARAMETREE_REAL_RATIO": "Apply 1:1 scale",
    "INFO_SELECT_MULTIPLE_AND_OTHER": "other",
    "INFO_SELECT_MULTIPLE_AND_OTHERS": "others",
    "INFO_SETUP_ENABLE_HOTKEYS": "Enable keyboard shortcuts",
    "INFO_SETUP_ENABLE_EMPTY_FIELDS": "Create new calculators with empty fields (no default values)",
    "INFO_SETUP_ENABLE_NOTIFICATIONS": "Enable on-screen notifications",
    "INFO_SETUP_FOLDED_RESULT_MESSAGES_LOG": "Fold result messages log by default",
    "INFO_SETUP_LANGUAGE": "Language",
    "INFO_SETUP_NEWTON_MAX_ITER": "Solver iteration limit",
    "INFO_SETUP_PRECISION_AFFICHAGE": "Number of displayed decimals",
    "INFO_SETUP_PRECISION_CALCUL": "Computation accuracy",
    "INFO_SETUP_RESTORE_DEFAULT_VALUES": "Restore default values",
    "INFO_SETUP_STORE_PREFERENCES": "Save preferences",
    "INFO_SETUP_TITLE": "Setup",
    "INFO_SESSION_PROPERTIES_EDIT": "Edit",
    "INFO_SESSION_PROPERTIES_HELP": "help",
    "INFO_SESSION_PROPERTIES_PREVIEW": "Preview",
    "INFO_SESSION_PROPERTIES_TITLE": "Session properties",
    "INFO_SESSION_PROPERTIES_USES_MD_FORMAT": "Uses markdown format",
    "INFO_SNACKBAR_DEFAULT_SETTINGS_RESTORED": "Default settings restored",
    "INFO_SNACKBAR_RESULTS_CALCULATED": "Results calculated for",
    "INFO_SNACKBAR_RESULTS_INVALIDATED": "Results invalidated for",
    "INFO_SNACKBAR_SETTINGS_SAVED": "Settings saved on this device",
    "INFO_SOLVEUR_TITRE": "Multimodule solver",
    "INFO_SOLVEUR_DESCRIPTION": "maths mathematics",
    "INFO_SOLVEUR_TITRE_COURT": "Solver",
    "INFO_SPP_TITRE": "Sum and product of powers",
    "INFO_SPP_DESCRIPTION": "plus times maths mathematics",
    "INFO_SPP_TITRE_COURT": "SPP",
    "INFO_THEME_CREDITS": "Credit",
    "INFO_THEME_DEVALAISON_TITRE": "Downstream migration",
    "INFO_THEME_DEVALAISON_DESCRIPTION": "Tools for dimensioning the structures present on the water intakes of hydroelectric power plants known as \"ichthyocompatible\" and consisting of fine grid planes associated with one or more outlets.",
    "INFO_THEME_HYDRAULIQUE_A_SURFACE_LIBRE_DESCRIPTION": "Calculation modules for flows in channels and rivers",
    "INFO_THEME_HYDRAULIQUE_A_SURFACE_LIBRE_TITRE": "Open-channel flow",
    "INFO_THEME_HYDRAULIQUE_EN_CHARGE_DESCRIPTION": "Modules for calculating head losses in pressure pipes",
    "INFO_THEME_HYDRAULIQUE_EN_CHARGE_TITRE": "Pipe flow",
    "INFO_THEME_LOIS_D_OUVRAGES_DESCRIPTION": "Flow calculation for hydraulic devices (gates, weir, orifices)",
    "INFO_THEME_LOIS_D_OUVRAGES_TITRE": "Hydraulic structures",
    "INFO_THEME_MODULES_INUTILISES_DESCRIPTION": "Various calculation modules",
    "INFO_THEME_MODULES_INUTILISES_TITRE": "Other calculation modules",
    "INFO_THEME_OUTILS_MATHEMATIQUES_TITRE": "Mathematical tools",
    "INFO_THEME_OUTILS_MATHEMATIQUES_DESCRIPTION": "Miscellaneous generic mathematical tools",
    "INFO_THEME_PASSE_A_BASSIN_DESCRIPTION": "Tools for sizing a fish pass made with pools also called fish steps, or a cascaded boulder bar ramp",
    "INFO_THEME_PASSE_A_BASSIN_TITRE": "Fish ladder",
    "INFO_THEME_PASSE_A_RALENTISSEURS_TITRE": "Baffle fishway",
    "INFO_THEME_PASSE_A_RALENTISSEURS_DESCRIPTION": "Baffle fishway",
    "INFO_THEME_PASSE_NATURELLE_DESCRIPTION": "Tools for sizing a evenly distributed macro-roughnesses pass in rockfill or prefabricated",
    "INFO_THEME_PASSE_NATURELLE_TITRE": "Evenly distributed macro-roughness fish pass",
    "INFO_THEME_VERIFICATION_DESCRIPTION": "The purpose of this tool is to carry out a simple check of the compatibility between certain fish pass sizing criteria and the passage capacities of the target fish species. It may prove useful during the design phase of a facility to ensure that the proposed design is consistent with its hydrological operating range",
    "INFO_THEME_VERIFICATION_TITRE": "Crossability verification",
    "INFO_TITREJOURNAL": "Calculation log",
    "INFO_TITREJOURNAL_GLOBAL": "Calculation log synthesis",
    "INFO_WELCOME_CONTENT": "<p>The Cassiopée software was developed by the ecohydraulic R&D pole gathering <a href=\"https://ofb.gouv.fr\" target=\"_blank\">OFB</a> (French Office for Biodiversity) and <a href=\"https://www.imft.fr\" target=\"_blank\">IMFT</a> (Fluids Mechanics Institute of Toulouse) and by <a href=\"http://g-eau.fr/index.php/en/\" target=\"_blank\">UMR G-EAU</a> (Joint Research Unit \"Water Management, Actors, Territories\").</p><p>It includes tools for designing fish crossing devices for upstream and downstream migrations, and hydraulic calculation tools useful for environmental and agricultural engineering.</p><p>For more information, consult <a href=\"assets/docs/en/mentions_legales.html\" target=\"_blank\">legal notice</a> and <a href=\"assets/docs/en/index.html\" target=\"_blank\">documentation</a>.</p>",
    "INFO_WELCOME_SUBTITLE": "Hydraulic calculators",
    "INFO_EXAMPLE_LABEL_CHANNEL_FLOW": "Channel flow with hydraulic structures",
    "INFO_EXAMPLE_LABEL_PAB_COMPLETE": "Standard fish ladder",
    "INFO_EXAMPLE_LABEL_PAB_ECH_TRIANG": "Triangular weirs fish ladder",
    "INFO_EXAMPLE_LABEL_PENTE_CRITIQUE_CANAL": "Canal critical slope",
    "INFO_EXAMPLE_LABEL_PB": "Pre-dam",
    "INFO_EXAMPLE_LABEL_PERR": "Rock-ramp fish pass",
    "INFO_EXAMPLE_LABEL_RANGEES_PERIOD": "Rip-rap pass in periodic rows",
    "INFO_EXAMPLE_LABEL_WEIR_JET_LENGTH": "Weir jet length",
    "INFO_EXAMPLES_TITLE": "Examples",
    "INFO_EXAMPLES_SUBTITLE": "Load standard examples",
    "INFO_YAXB_TITRE": "Linear function",
    "INFO_YAXB_DESCRIPTION": "addition plus subtraction minus multiplication division maths mathematics",
    "INFO_YAXB_TITRE_COURT": "Linear f.",
    "INFO_TRIGO_TITRE": "Trigonometric function",
    "INFO_TRIGO_DESCRIPTION": "cosinus sinus tangent arc maths mathematics",
    "INFO_TRIGO_TITRE_COURT": "Trigo. f.",
    "INFO_VERIF_CREATE_PASS_FRIST": "Create first a fish ladder, a baffle fishway or a rock-ramp fishpass",
    "INFO_VERIF_CREATE_ATLEAST_ONE_TARGETNUB": "Create at least one targetted nub",
    "INFO_VERIF_SOLVER_SEARCHED_PARAM": "Select another target result",
    "INFO_VERIF_SELECT_SPECIES_FIRST": "Select first one or several fish species",
    "INFO_VERIF_OK": "Crossing criteria are met for all species",
    "INFO_VERIF_VARYING_OK": "Crossing criteria are met for all species and all pass modalities",
    "WARNING_VERIF_OK_BUT": "Crossing criteria are met for all species, but there are warnings",
    "WARNING_VERIF_VARYING_OK_BUT": "Only certain modalities of the pass are crossable",
    "INFO_VERIFICATEUR_CUSTOM_SPECIES": "Custom species: %s",
    "INFO_VERIFICATEUR_SPECIES_GROUP": "Species group",
    "INFO_VERIFICATEUR_TITRE": "Fish pass verification",
    "INFO_VERIFICATEUR_DESCRIPTION": "ichtyocompatible",
    "INFO_VERIFICATEUR_TITRE_COURT": "Verification",
    "INFO_ESPECE_TITRE": "Fish species characteristics",
    "INFO_ESPECE_DESCRIPTION": "ichtyocompatible",
    "INFO_ESPECE_TITRE_COURT": "Species",
    "INFO_SERVICE_WORKER_VERSION_DETECTED": "Downloading Cassiopée version %ver%...",
    "INFO_SERVICE_WORKER_VERSION_READY": "Cassiopée version %ver% is ready to be used, please restart.",
    "ERROR_SERVICE_WORKER_INSTALL_FAILED": "Cassiopée new version installation failed.",
    "ERROR_JET_SUBMERGED_NO_SOLUTION": "There is no solution",
    "WARNING_DEVER_ZDV_INF_ZR": "Apron elevation of structure #%number% is below river bed elevation",
    "WARNING_JET_START_SUBMERGED": "Water elevation is greater than jet start elevation",
    "WARNING_JET_START_ELEVATION_UNDERGROUND": "Bottom elevation cannot be higher than jet start elevation",
    "WARNING_JET_WATER_ELEVATION_UNDERGROUND": "Bottom elevation cannot be higher than water elevation",
    "WARNING_REMOUS_ARRET_CRITIQUE": "Calculation stopped: critical elevation reached at abscissa %x%",
    "WARNING_STRUCTUREKIVI_HP_TROP_ELEVE": "h/p must not be greater than 2.5. h/p is forced to 2.5",
    "WARNING_STRUCTUREKIVI_PELLE_TROP_FAIBLE": "Threshold height should be greater than 0.1 m. Beta coefficient is forced to 0",
    "WARNING_VANLEV_ZDV_INF_MIN": "Regulated weir: minimum sill elevation reached",
    "WARNING_VANLEV_ZDV_SUP_MAX": "Regulated weir: maximum sill elevation reached",
    "WARNING_GRILLE_ALPHA_GREATER_THAN_45": "Recommendation for fish guiding: α ≤ 45°",
    "WARNING_GRILLE_BETA_GREATER_THAN_26": "Recommendation for fish guiding: β ≤ 26°",
    "WARNING_GRILLE_VN_GREATER_THAN_05": "Recommendation to prevent fish getting stuck on grid plan (physical barrier) or prematurely passing through the grid (behavioural barrier): VN ≤ 0.5 m/s.<br>Above average value calculated here, refer to the recommendations taken from experimental caracterisation of effective velocity values.",
    "WARNING_GRILLE_O_LOWER_THAN_OB": "Total obstruction (entered) is lower than obstruction due to bars only (calculated)",
    "WARNING_LECHAPT_CALMON_SPEED_OUTSIDE_04_2": "This formula is discouraged for a velocity that is not between 0.4 and 2 m/s",
    "WARNING_UPSTREAM_BOTTOM_HIGHER_THAN_WATER": "Upstream water elevation is lower or equal to bottom elevation",
    "WARNING_DOWNSTREAM_BOTTOM_HIGHER_THAN_WATER": "Downstream water elevation is lower or equal to bottom elevation",
    "WARNING_NEGATIVE_SILL": "Sill should be positive",
    "WARNING_RAMP_WIDTH_LOWER_THAN_PATTERN_WIDTH": "Ramp width should contain at least one block (%pattern%m)",
    "WARNING_RAMP_WIDTH_NOT_MULTIPLE_OF_HALF_PATTERN_WIDTH": "Ramp width should be a multiple of half the block width (%halfPattern%m). Nearest values are %lower% and %higher%",
    "WARNING_MACRORUGO_CONCENTRATION_OUT_OF_BOUNDS": "The calculation formula has not been experimentally validated for block concentrations not between 8% and 20%",
    "WARNING_YN_SECTION_PENTE_NEG_NULLE_HNORMALE_INF": "Normal depth: slope is negative or zero, normal depth is infinite",
    "WARNING_YN_SECTION_NON_CONVERGENCE_NEWTON_HNORMALE": "Normal depth: non convergence of the calculation (Newton's method)",
    "WARNING_SECTION_OVERFLOW": "Overflow: water elevation exceeds embankment elevation",
    "WARNING_SECTION_OVERFLOW_ABSC": "Overflow: water elevation exceeds embankment elevation between abscissae %xa% et %xb%",
    "WARNING_SESSION_LOAD_NOTES_MERGED": "Notes have been merged",
    "WARNING_VALUE_ROUNDED_TO_INTEGER": "Value of %symbol% was rounded to %rounded%",
    "WARNING_VARIATED_LENGTH_LIMITED_BY_LINKED_RESULT": "Number of results is limited by linked result %symbol%",
    "WARNING_ELEVATION_Z1_LOWER_THAN_ZF1": "Apron n°%number%: calculated flow is null because upstream elevation is lower than the upstream bottom elevation of the ramp",
    "WARNING_ELEVATION_Z1_EQUAL_TO_ZF1": "Apron n°%number%: calculated flow is null because upstream elevation is equal to the upstream bottom elevation of the ramp",
    "ERROR_PAR_P_DEVIATES_MORE_THAN_10_5_PCT": "Given spacing value is more than 10% lower or more than 5% greater than standard value %stdP%",
    "ERROR_PAR_QSTAR_OUT_OF_RANGE": "Flow value %val% is outside of validity interval [ %min%, %max% ] given by abacuses",
    "ERROR_PAR_HA_OUT_OF_RANGE": "Upstream head value %val% is outside of validity interval [ %min%, %max% ] given by abacuses",
    "WARNING_PAR_L": "A witdh greater than %max% is discouraged",
    "ERROR_PAR_L": "Width is outside validity interval [ %min%, %max% ]",
    "WARNING_ERROR_PAR_L": "Width is outside validity interval [ %min%, %max% ]",
    "WARNING_PAR_S": "Slope should not be outside interval [ %min%, %max% ]",
    "ERROR_PAR_S": "Slope is outside validity interval [ %min%, %max% ]",
    "WARNING_PAR_A": "A height greater than %max% is discouraged",
    "ERROR_PAR_A": "Height is outside validity interval [ %min%, %max% ]",
    "WARNING_PAR_N_ROUNDED_TO_05": "Number of patterns was rounded to %val%",
    "WARNING_PAR_M_ROUNDED_TO_1": "Number of longitudinal strips was rounded to %val%",
    "WARNING_PAR_NOT_SUBMERGED": "Insufficient downstream submergence : fall at the last downstream baffle (%DH% m).",
    "ERROR_PAR_M_GREATER_THAN_2_N": "Number of longitudinal strips exceeds 2N = %max%",
    "INFO_PARENT_PREFIX": "%name% #%position%: ",
    "INFO_PARENT_PREFIX_SHORT": "%name%%position%",
    "INFO_PARENT_PREFIX_DOWNWALL": "downwall: ",
    "ERROR_VERIF_ERRORS_IN_PASS": "Pass to verify contains errors",
    "ERROR_VERIF_VARYING_ERRORS_IN_PASS": "Pass to verify contains error at iteration %i%",
    "ERROR_VERIF_MISSING_CRITERION": "Criterion %var_criterion% must be defined",
    "ERROR_VERIF_MR_VMAX": "Maximum velocity %V% too high (maximum: %maxV%)",
    "ERROR_VERIF_MR_SUBMERGED": "Submerged blocks",
    "ERROR_VERIF_MR_PVMAX": "Dissipated power %PV% too high (maximum: %maxPV%)",
    "ERROR_VERIF_MR_YMIN": "Water level %Y% too low (minimum: %minY%)",
    "ERROR_VERIF_MRC_AT_LEAST_ONE_APRON": "None of the aprons is crossable",
    "ERROR_VERIF_MRC_CROSSABLE_WIDTH": "Crossable width %width% m is lower than the width of a block pattern %patternWidth% m",
    "WARNING_VERIF_MRC_VMAX_APRON_N": "Maximum velocity %V% too high (maximum: %maxV%)",
    "WARNING_VERIF_MRC_SUBMERGED_APRON_N": "Submerged blocks",
    "WARNING_VERIF_MRC_YMIN_APRON_N": "Water level %Y% too low (minimum: %minY%)",
    "INFO_VERIF_MRC_CROSSABLE_WIDTH": "Maximum crossable width is %width% m",
    "ERROR_VERIF_NO_PRESET": "This species group is not compatible with this pass type",
    "ERROR_VERIF_PAB_DIVING_JET_NOT_SUPPORTED": "Diving jet not supported",
    "WARNING_VERIF_PAB_DIVING_JET_NOT_SUPPORTED": "Diving jet not supported",
    "ERROR_VERIF_PAB_DHMAX": "Fall %DH% too high (maximum for surface jet: %maxDHS%, maximum for diving jet: %maxDHP%)",
    "ERROR_VERIF_PAB_DHMAX_JET": "Fall %DH% too high for jet type ENUM_STRUCTUREJETTYPE_%jetType% (maximum: %maxDH%)",
    "WARNING_VERIF_PAB_DHMAX_JET": "Fall %DH% too high for jet type ENUM_STRUCTUREJETTYPE_%jetType% (maximum: %maxDH%)",
    "ERROR_VERIF_PAB_BMIN": "Slot/weir width %L% too low (minimum: %minB%)",
    "WARNING_VERIF_PAB_BMIN": "Slot/weir width %L% too low (minimum: %minB%)",
    "ERROR_VERIF_PAB_LMIN": "Basin length %LB% too low (minimum for surface jet: %minLBS%, minimum for diving jet: %minLBS%)",
    "ERROR_VERIF_PAB_LMIN_JET": "Basin length %LB% too low for jet type ENUM_STRUCTUREJETTYPE_%jetType% (minimum: %minLB%)",
    "WARNING_VERIF_PAB_LMIN_JET": "Basin length %LB% too low for jet type ENUM_STRUCTUREJETTYPE_%jetType% (minimum: %minLB%)",
    "WARNING_VERIF_PAB_HMIN": "Head on weir %h1% too low (minimum: %minH%)",
    "ERROR_VERIF_PAB_SMIN": "Orifice surface %S% is too low (minimum: %minS%)",
    "WARNING_VERIF_PAB_SMIN": "Orifice surface %S% is too low (minimum: %minS%)",
    "ERROR_VERIF_PAB_YMOY": "Basin depth %PB% too low (minimum for surface jet: %minPBS%, minimum for diving jet: %minPBP%)",
    "ERROR_VERIF_PAB_YMOY_JET": "Basin depth %PB% too low for jet type ENUM_STRUCTUREJETTYPE_%jetType% (minimum: %minPB%)",
    "WARNING_VERIF_PAB_YMOY_JET": "Basin depth %PB% too low for jet type ENUM_STRUCTUREJETTYPE_%jetType% (minimum: %minPB%)",
    "ERROR_VERIF_PAB_YMOY_2_DH": "Basin depth %PB% lower than 2x fall %DH%",
    "WARNING_VERIF_PAB_YMOY_2_DH": "Basin depth %PB% lower than 2x fall %DH%",
    "ERROR_VERIF_PAB_PVMAX": "Dissipated power %PV% too high (maximum: %maxPV%)",
    "ERROR_VERIF_PAR_DH": "Downstream pass fall prevents crossability",
    "ERROR_VERIF_PAR_SLOPE": "Slope %S% too high (maximum: %maxS%)",
    "ERROR_VERIF_PAR_YMIN": "Water level %h% too low (minimum: %minY%)",
    "ERROR_VERIF_KO": "Crossability criteria are not met for at least one species group",
    "ERROR_VERIF_VARYING_KO": "Crossability criteria are not met for at least one species group, for all pass modalities",
    "WARNING_VERIF_PAB_PVMAX": "Dissipated power %PV% very high (recommanded: %maxPV%)",
    "WARNING_VERIF_PAB_ORIFICE": "Uninsured passage over an orifice",
    "ERROR_VERIF_SPECIES_GROUP_KO": "Crossability criteria are not met for species group ENUM_%speciesGroup%",
    "WARNING_VERIF_SPECIES_GROUP_OK_BUT": "Crossability criteria are met for species group ENUM_%speciesGroup%, but there are warnings",
    "INFO_VERIF_SPECIES_GROUP_OK": "Crossability criteria are met for species group ENUM_%speciesGroup%",
    "ERROR_VERIF_SPECIES_NUB_KO": "Crossability criteria are not met for custom species FORM_ID_%uid%",
    "WARNING_VERIF_SPECIES_NUB_OK_BUT": "Crossability criteria are met for custom species FORM_ID_%uid%, but there are warnings",
    "INFO_VERIF_SPECIES_NUB_OK": "Crossability criteria are met for custom species FORM_ID_%uid%",
    "ERROR_VERIF_PAB_WALL_NOT_CROSSABLE": "Wall #%N% is not crossable",
    "ERROR_VERIF_PAB_DW_NOT_CROSSABLE": "Downwall is not crossable",
    "WARNING_VERIF_PAR_SPECIES_GROUP": "Species groups 3a, 3b et 7b are discouraged for this pass type",
    "ERROR_MACRORUGOREMOUS_VARIATED_TARGET_PAM": "Target rock-ramp has variated parameters",
    "WARNING_MACRORUGOREMOUS_CHUTE_AVAL": "Downstream fall detected: the downstream water level is below the critical level (%zCrit% m). Fall: %fall% m (not modelled)"
}