This commit was manufactured by cvs2svn to create tag 'Release-0-1'.

CVSROOT/checkoutlist

-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
-#
-# comment lines begin with '#'

CVSROOT/commitinfo

-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# Format strings present in the filter will be replaced as follows:
-#    %p = path relative to repository
-#    %r = repository (path portion of $CVSROOT)
-#    %{s} = file name, file name, ...
-#
-# If no format strings are present in the filter string, a default of
-# " %r %s" will be appended to the filter string, but this usage is
-# deprecated.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOEFWUPCGMAR
-
-# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg
-# script to change the log message.  Set it to `stat' to force CVS to verify
-# that the file has changed before reading it (this can take up to an extra
-# second per directory being committed, so it is not recommended for large
-# repositories.  Set it to `never' (the previous CVS behavior) to prevent
-# verifymsg scripts from changing the log message.
-#RereadLogAfterVerify=always
-
-# Set `UserAdminOptions' to the list of `cvs admin' commands (options)
-# that users not in the `cvsadmin' group are allowed to run.  This
-# defaults to `k', or only allowing the changing of the default
-# keyword expansion mode for files for users not in the `cvsadmin' group.
-# This value is ignored if the `cvsadmin' group does not exist.
-#
-# The following string would enable all `cvs admin' commands for all
-# users:
-#UserAdminOptions=aAbceIklLmnNostuU
-
-# Set `UseNewInfoFmtStrings' to `no' if you must support a legacy system by
-# enabling the deprecated old style info file command line format strings.
-# Be warned that these strings could be disabled in any new version of CVS.
-UseNewInfoFmtStrings=yes

CVSROOT/cvswrappers

-# This file affects handling of files based on their names.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/loginfo

-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# If any format strings are present in the filter, they will be replaced as follows:
-#    %p = path relative to repository
-#    %r = repository (path portion of $CVSROOT)
-#    %{sVv} = attribute list = file name, old version number (pre-checkin),
-#           new version number (post-checkin).  When either old or new revision is
-#           unknown, doesn't exist, or isn't applicable, the string "NONE" will be
-#           placed on the command line instead.
-#
-# Note that %{sVv} is a list operator and not all elements are necessary.  Thus %{sv} is
-# a legal format string, but will only be replaced with file name and new revision.
-# it also generates multiple arguments for each file being operated upon.  i.e. if two
-# files, file1 & file2, are being commited from 1.1 to version 1.1.2.1 and from 1.1.2.2
-# to 1.1.2.3, respectively, %{sVv} will generate the following six arguments in this
-# order: file1, 1.1, 1.1.2.1, file2, 1.1.2.2, 1.1.2.3.
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

CVSROOT/modules

-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/notify

-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# format strings are replaceed as follows:
-#    %p = path relative to repository
-#    %r = repository (path portion of $CVSROOT)
-#    %s = user to notify
-#
-# For example:
-#ALL (echo Committed to %r/%p; cat) |mail %s -s "CVS notification"

CVSROOT/rcsinfo

-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments if no format strings are present:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- tagtype "?" on delete, "T" for branch, "N" for static
-# $4 -- repository
-# $5->  file revision [file revision ...]
-#
-# If any format strings are present in the filter, they will be replaced as follows:
-#    %b = branch mode = "?" (delete ops - unknown) | "T" (branch) | "N" (not branch)
-#    %o = operation = "add" | "mov" | "del"
-#    %p = path relative to repository
-#    %r = repository (path portion of $CVSROOT)
-#    %t = tagname
-#    %{sVv} = attribute list = file name, old version tag will be deleted from,
-#           new version tag will be added to (or deleted from, but this feature is
-#           deprecated.  When either old or new revision is unknown, doesn't exist,
-#           or isn't applicable, the string "NONE" will be placed on the command
-#           line.
-#
-# Note that %{sVv} is a list operator and not all elements are necessary.  Thus %{sV} is
-# a legal format string, but will only be replaced with file name and old revision.
-# it also generates multiple arguments for each file being operated upon.  i.e. if two
-# files, file1 & file2, are having a tag moved from version 1.1 to versoin 1.1.2.9, %{sVv}
-# will generate the following six arguments in this order: file1, 1.1, 1.1.2.9, file2, 1.1,
-# 1.1.2.9.
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Format strings present in the filter will be replaced as follows:
-#    %p = path relative to repository
-#    %r = repository (path portion of $CVSROOT)
-#    %l = name of log file to be verified.
-#
-# If no format strings are present in the filter, a default " %l" will
-# be appended to the filter, but this usage is deprecated.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.