initial checkin

CVSROOT/checkoutlist

+# The "checkoutlist" file is used to support additional version controlled
+# administrative files in $CVSROOT/CVSROOT, such as template files.
+#
+# The first entry on a line is a filename which will be checked out from
+# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
+# The remainder of the line is an error message to use if the file cannot
+# be checked out.
+#
+# File format:
+#
+#	[<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
+#
+# comment lines begin with '#'

CVSROOT/commitinfo

+# The "commitinfo" file is used to control pre-commit checks.
+# The filter on the right is invoked with the repository and a list 
+# of files to check.  A non-zero exit of the filter program will 
+# cause the commit to be aborted.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being committed to, relative
+# to the $CVSROOT.  For the first match that is found, then the remainder
+# of the line is the name of the filter to run.
+#
+# Format strings present in the filter will be replaced as follows:
+#    %p = path relative to repository
+#    %r = repository (path portion of $CVSROOT)
+#    %{s} = file name, file name, ...
+#
+# If no format strings are present in the filter string, a default of
+# " %r %s" will be appended to the filter string, but this usage is
+# deprecated.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

+# Set this to "no" if pserver shouldn't check system users/passwords
+#SystemAuth=no
+
+# Put CVS lock files in this directory rather than directly in the repository.
+#LockDir=/var/lock/cvs
+
+# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
+# level of the new working directory when using the `cvs checkout'
+# command.
+#TopLevelAdmin=no
+
+# Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the
+# history file, or a subset as needed (ie `TMAR' logs all write operations)
+#LogHistory=TOEFWUPCGMAR
+
+# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg
+# script to change the log message.  Set it to `stat' to force CVS to verify
+# that the file has changed before reading it (this can take up to an extra
+# second per directory being committed, so it is not recommended for large
+# repositories.  Set it to `never' (the previous CVS behavior) to prevent
+# verifymsg scripts from changing the log message.
+#RereadLogAfterVerify=always
+
+# Set `UserAdminOptions' to the list of `cvs admin' commands (options)
+# that users not in the `cvsadmin' group are allowed to run.  This
+# defaults to `k', or only allowing the changing of the default
+# keyword expansion mode for files for users not in the `cvsadmin' group.
+# This value is ignored if the `cvsadmin' group does not exist.
+#
+# The following string would enable all `cvs admin' commands for all
+# users:
+#UserAdminOptions=aAbceIklLmnNostuU
+
+# Set `UseNewInfoFmtStrings' to `no' if you must support a legacy system by
+# enabling the deprecated old style info file command line format strings.
+# Be warned that these strings could be disabled in any new version of CVS.
+UseNewInfoFmtStrings=yes

CVSROOT/cvswrappers

+# This file affects handling of files based on their names.
+#
+# The -m option specifies whether CVS attempts to merge files.
+#
+# The -k option specifies keyword expansion (e.g. -kb for binary).
+#
+# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
+#
+#  wildcard	[option value][option value]...
+#
+#  where option is one of
+#  -f		from cvs filter		value: path to filter
+#  -t		to cvs filter		value: path to filter
+#  -m		update methodology	value: MERGE or COPY
+#  -k		expansion mode		value: b, o, kkv, &c
+#
+#  and value is a single-quote delimited value.
+# For example:
+#*.gif -k 'b'

CVSROOT/modules

+# Three different line formats are valid:
+#	key	-a    aliases...
+#	key [options] directory
+#	key [options] directory files...
+#
+# Where "options" are composed of:
+#	-i prog		Run "prog" on "cvs commit" from top-level of module.
+#	-o prog		Run "prog" on "cvs checkout" of module.
+#	-e prog		Run "prog" on "cvs export" of module.
+#	-t prog		Run "prog" on "cvs rtag" of module.
+#	-u prog		Run "prog" on "cvs update" of module.
+#	-d dir		Place module in directory "dir" instead of module name.
+#	-l		Top-level directory only -- do not recurse.
+#
+# NOTE:  If you change any of the "Run" options above, you'll have to
+# release and re-checkout any working directories of these modules.
+#
+# And "directory" is a path to a directory relative to $CVSROOT.
+#
+# The "-a" option specifies an alias.  An alias is interpreted as if
+# everything on the right of the "-a" had been typed on the command line.
+#
+# You can encode a module within a module by using the special '&'
+# character to interpose another module into the current module.  This
+# can be useful for creating a module that consists of many directories
+# spread out over the entire source repository.

CVSROOT/notify

+# The "notify" file controls where notifications from watches set by
+# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
+# a regular expression which is tested against the directory that the
+# change is being made to, relative to the $CVSROOT.  If it matches,
+# then the remainder of the line is a filter program that should contain
+# one occurrence of %s for the user to notify, and information on its
+# standard input.
+#
+# "ALL" or "DEFAULT" can be used in place of the regular expression.
+#
+# format strings are replaceed as follows:
+#    %p = path relative to repository
+#    %r = repository (path portion of $CVSROOT)
+#    %s = user to notify
+#
+# For example:
+#ALL (echo Committed to %r/%p; cat) |mail %s -s "CVS notification"

CVSROOT/rcsinfo

+# The "rcsinfo" file is used to control templates with which the editor
+# is invoked on commit and import.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being made to, relative to the
+# $CVSROOT.  For the first match that is found, then the remainder of the
+# line is the name of the file that contains the template.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

+# The "taginfo" file is used to control pre-tag checks.
+# The filter on the right is invoked with the following arguments if no format strings are present:
+#
+# $1 -- tagname
+# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
+# $3 -- tagtype "?" on delete, "T" for branch, "N" for static
+# $4 -- repository
+# $5->  file revision [file revision ...]
+#
+# If any format strings are present in the filter, they will be replaced as follows:
+#    %b = branch mode = "?" (delete ops - unknown) | "T" (branch) | "N" (not branch)
+#    %o = operation = "add" | "mov" | "del"
+#    %p = path relative to repository
+#    %r = repository (path portion of $CVSROOT)
+#    %t = tagname
+#    %{sVv} = attribute list = file name, old version tag will be deleted from,
+#           new version tag will be added to (or deleted from, but this feature is
+#           deprecated.  When either old or new revision is unknown, doesn't exist,
+#           or isn't applicable, the string "NONE" will be placed on the command
+#           line.
+#
+# Note that %{sVv} is a list operator and not all elements are necessary.  Thus %{sV} is
+# a legal format string, but will only be replaced with file name and old revision.
+# it also generates multiple arguments for each file being operated upon.  i.e. if two
+# files, file1 & file2, are having a tag moved from version 1.1 to versoin 1.1.2.9, %{sVv}
+# will generate the following six arguments in this order: file1, 1.1, 1.1.2.9, file2, 1.1,
+# 1.1.2.9.
+#
+# A non-zero exit of the filter program will cause the tag to be aborted.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being committed to, relative
+# to the $CVSROOT.  For the first match that is found, then the remainder
+# of the line is the name of the filter to run.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".